







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow to Measure a Window for Replacement in North Las Vegas, NV
To measure a window for replacement, you take three dimensions, not one. Measure the visible glass opening, then the frame-to-frame opening, then the nail-fin to nail-fin width, and write each one down separately. On a stucco-on-frame home, which covers most of the post-1990 housing stock in North Las Vegas, those three numbers are all different. Ordering against the wrong one is the single most common reason a replacement window arrives too tight, too loose, or short of the wall plane and won’t install without cutting into the stucco surround.
If you’d rather skip the tape and the guesswork, call (844) 797-5026. We field-measure, confirm which dimension you actually order against, and quote Andersen or Marvin windows fabricated to that exact opening.

Why North Las Vegas Homes Have Three Different “Window Sizes”
Here’s the situation most measuring guides miss entirely. The generic advice online assumes a wood-frame or vinyl-siding house where you pop the trim, find the rough opening, and order to it. North Las Vegas doesn’t build that way. From the master-planned subdivisions in Tule Springs, Valley Vista, and Aliante out to the older ranch homes near Downtown and Rancho, the exterior is heavily stucco over frame. Stucco sits proud of the framing, wraps a wire lath, and buries the window’s nailing flange behind that coat. So the dimensions you can reach with a tape measure are not the dimensions the window is ordered against.
Split the numbers into three:
- Daylight opening (DLO): the visible glass area, measured inside the frame. This is what you measure from inside the room, side to side and top to bottom, corner to corner.
- Frame-to-frame: the outside edges of the existing window frame, measured on the interior jamb after trim is pulled. This is the number a direct, frame-in-frame replacement window is ordered against.
- Nail-fin to nail-fin: the full flange span on a new-construction window, which sits behind the stucco. This is the rough-opening dimension, and it only matters if the whole frame and flange come out.
Order a frame-in-frame replacement window against frame-to-frame. Order a full new-construction window against the nailed-fin rough opening. Write down all three anyway, because the difference between them tells you which install method is even possible without touching the stucco.
The Stucco Depth Step Generic Guides Skip
No standard measuring guide tells you to measure stucco thickness. On a North Las Vegas home, you should. Reach past the nail fin with a thin rule, or pull a small section of interior trim, and measure the depth from the interior wall plane to the outside face of the existing frame. Then note how thick the stucco coat runs. That pair of numbers decides whether your new window sits flush with the wall or slightly proud of it.
Why it matters: a replacement window installed flush needs finish trim that measures to the new reveal. A window proud of the wall plane needs a different trim profile and different weatherproofing at the perimeter. Get this wrong going in, and the trim, caulk, and flashing detail becomes a redo. Our technicians, who carry up to 12 years of experience and work on stucco homes across North Las Vegas week in and week out, measure this on every field assessment because it changes which window series and trim we order.
What to look for before you trust any measurement:
- Measure the width at the top, middle, and bottom of the opening. Measure height at the left, middle, and right.
- Note the smallest of the three. That’s your order dimension, never the largest.
- Check square by measuring both diagonals. If they don’t match within an eighth of an inch, the opening is out of square.
- Confirm whether the existing window is a frame-in-frame candidate or a full flange-out job.
- Record stucco depth and existing frame depth as described above.
That “measure at three points” rule isn’t optional in North Las Vegas. Post-1990 production-built homes here went up fast, and rough openings frequently run slightly out of square. A single center measurement on an out-of-square opening produces a window that won’t fit at the corners.

When a Homeowner Tape Measure Is Enough, and When It Isn’t
You can measure a direct frame-in-frame replacement on your own when the opening is under 36 inches wide, the existing frame is intact, and you’re replacing like for like. Measure inside the jamb, take the smallest of your three widths and three heights, and order to that. That’s genuinely enough for a standard bedroom or bath window.
Call a pro for the rest:
- Oversized openings, picture windows, or anything wider than 36 inches
- Non-standard shapes: arched, angled, or sloped
- Any plan to modify the rough opening, or any home where the existing frame is rotted, bowed, or out of square
- Sliding glass doors and multi-panel assemblies
In those cases a professional field measure prevents the mistake that costs real money: ordering a window that can’t install without a structural or stucco alteration. Our no-hassle upfront pricing means the number we quote from that field measure is the number you pay.
Why Custom-Size Windows Solve North Las Vegas Rough Openings
Here’s the advantage of working with Groundwork Construction Co. of North Las Vegas. We order Andersen and Marvin windows in custom sizes fabricated to field measurements, not just standard increments. That means an irregular or slightly out-of-square North Las Vegas rough opening doesn’t force a costly opening modification to fit a stock size. We order the exact dimension and back it with the Windows & Doors service. Every install also carries the 730-Day Done Right Promise: if it isn’t done right, we make it right.
What does a window replacement cost in North Las Vegas? Typical window replacement runs $4,500-$15,000 for a project, and impact window installation runs $8,000-$25,000. Field measuring and custom-sizing are part of the service, with 0% financing for 18 months available and $1,000 off any project over $10,000. For context on how our window projects compare to the rest of the work we do in the city’s split market of greenfield builds and aging infill, see our North Las Vegas service area.
Window replacement price ranges in North Las Vegas
| Service | Typical Range |
|---|---|
| Window Replacement (per project) | $4,500-$15,000 |
| Impact Window Installation | $8,000-$25,000 |
The high-wind and seismic zone North Las Vegas sits in raises the bar on anchors, flashing, and wind-uplift ratings for exterior openings. A window sized right and installed to code is the difference between a warranty that holds and one that doesn’t.
FAQs
Measure the inside jamb on the frame-to-frame dimension: width at the top, middle, and bottom, height at the left, middle, and right, then order to the smallest of each. That’s the direct frame-in-frame method most North Las Vegas replacements use. If you’re unsure which dimension applies to your opening, call (844) 797-5026 for a free field measure.
Measure from inside for a frame-in-frame replacement, right at the jamb. For a full new-construction window, the rough opening must be measured from outside once the stucco and existing nail fin are accessible. Measuring from the wrong side is how stucco-on-frame homes end up with the wrong window.
Measure at three widths and three heights, take the smallest of each, and note the diagonal difference. If the opening is materially out of square, a stock size won’t fit cleanly, and a custom-size window ordered to your field measurement is the fix. Call (844) 797-5026 to schedule a measure before you order.
Within an eighth of an inch on every dimension is the practical target, and that’s the number to write down, not a rounded one. Measuring at three points captures the smallest dimension across a slightly skewed opening, which is the one you actually order against.
Book a Free Field Measure in North Las Vegas
If you’d rather not gamble on the tape, we’ll handle it. A no-pressure field assessment in North Las Vegas gives you the exact dimensions, the right window series, and upfront pricing with no surprises. Call (844) 797-5026 for a free estimate.
Written by the team at Groundwork Construction Co. of North Las Vegas, serving North Las Vegas, NV.


