







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Spring Valley, NV: What It Costs and How Long It Takes
Asphalt driveway paving in Spring Valley typically runs $3,500 to $9,000, and a full resurface or replacement lands between $5,000 and $14,000 depending on square footage and how much base work is needed. Most residential jobs take two to four working days from demo to drive-on, with a curing window before you park heavy vehicles. Call (844) 797-5026 and we’ll walk your lot, measure it, and put a line-item number in writing – free.
How we run an asphalt job, start to finish

Asphalt isn’t poured like concrete. It’s placed hot, rolled, and compacted, and the schedule around it matters as much as the mix. Here’s the real sequence.
Stage 1: Site walk and written estimate (day 0)
We measure the drive, check the slope and drainage away from the garage, and probe the existing base to see whether it’s failed or just worn. This is where you decide full replacement versus an overlay, and where we flag anything that needs a Clark County grading or dust-control gate before we touch dirt.
Stage 2: Demo and haul-off (day 1)
Failed asphalt comes out with a skid-steer and breaker, usually half a day for a standard two-car drive. Hauling is a real line item – a typical Spring Valley drive is 600 to 900 square feet of material, which is several truckloads. You’ll see the base for the first time here, and that’s the moment we confirm or revise the number.
Stage 3: Base prep and grading (day 1-2)
We grade for positive fall, compact the aggregate base in lifts, and stabilize the dirt before we leave the site each day. Southern Nevada inspectors will flag unstabilized soil, so dust control is part of the job, not an afterthought. This is also where caliche near the 215 beltway can add equipment time.
Stage 4: Paving and rolling (day 2-3)
Hot mix arrives, gets spread with a paver, and is rolled while it’s still workable. We finish edges by hand and set the transition at the garage apron and street cut. You’ll pick your mix depth (2 inches is common for residential; 3 inches where a truck or RV parks) and edge treatment before this stage.
Stage 5: Cure and striping (day 3-4, cure beyond)
Light foot traffic within a day; vehicles usually after 48 to 72 hours, and heavier vehicles longer. If you want a sealer, that waits several months so the asphalt can cure. Then we do the final walkthrough and hand you the written 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The asphalt options you’ll actually choose between
Most of the decisions on an asphalt job come down to five things. Here’s the honest trade-off on each.
- Overlay vs. full replacement. An overlay is cheaper and faster where the base is sound, but it adds thickness that can throw off drainage at the garage. Full replacement costs more up front and lasts longer where the base has failed.
- Mix depth. 2 inches suits a standard passenger drive. Step up to 3 inches if an RV, boat, or heavy truck sits on it – it costs more per square foot but resists rutting far better in extreme heat.
- Aggregate base. A properly compacted base is what keeps asphalt from cracking. Skipping it is the cheapest-looking bid and the most expensive decision you can make.
- Edge treatment. Clean asphalt edges or a paver border. A border adds cost but holds the edge against desert soil movement and looks sharper on a custom home.
- Sealer timing and type. Sealing is a separate, later item. We’ll tell you when the asphalt has cured enough for it to actually bond.
Premium finishes here lean on supply partners like Atlas and Tamko for the mix and membrane systems, matched to what your drive actually needs rather than a one-size spec.
What asphalt driveways & resurfacing cost in Spring Valley, NV

Plan on $3,500 to $9,000 for new asphalt paving on a typical two-car drive, and $5,000 to $14,000 for full replacement where the base has to come out. Those are real numbers for Spring Valley, not a national average. Sealing, when the time comes, is a separate $250 to $700.
Four things push a job toward the top of that range:
- Square footage. A single-car drive sits near the low end; a long RV pad or a circular drive pushes it up fast.
- Base condition. Sound base means an overlay or fresh top. Failed base means demo, haul-off, and new aggregate – the expensive part.
- Access and grading. Tight lots, steep fall toward the garage, or drainage that needs reworking all add labor.
- Permit scope. Most resurfacing doesn’t trigger a permit, but new drive approaches or grading changes can. We pull what’s required and pass the inspections.
A written estimate from us is line-item and fixed: demo, haul-off, base, mix, rolling, and cleanup, all spelled out. What typically isn’t included is a future sealer coat, landscape repair around the edges, and any utility work under the drive – we’ll call those out up front so nothing surprises you once work starts. Upfront pricing, no change orders.
See the difference
Before
After
Before
After
Before
AfterWhat Spring Valley homes specifically do to this job
Spring Valley is unincorporated Clark County, so a driveway project here runs through Clark County Public Works and Building Department permitting rather than a city hall – and that changes the paperwork, not just the price. Much of ZIP 89113 was built out in the 1990s and 2000s in master-planned subdivisions like Rhodes Ranch and the southern Highlands-adjacent edges, on raw desert that needed mass grading and tract-level utility build-outs. Those drives are now 20 to 30 years old and hitting the end of their life at the same time.
The desert is hard on asphalt. Summer highs over 105-110°F and relentless sun cook the binder and open cracks, which is why we see so much sun-checking and alligator cracking on south-facing drives. Monsoon flash-flood and wash drainage rules shape how we grade, and dust-control requirements mean stabilized dirt on every lot. Caliche-hard soil near the 215 beltway often forces equipment rental nobody budgeted for. HOA rules in the master-planned communities also govern color and edge treatment, so we check before we order mix.
Serving Spring Valley, NV – Our Local Coverage Area
We serve Spring Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – asphalt driveways & resurfacing in Spring Valley

Most residential jobs take two to four working days from demo to drive-on. Weather, base repairs, and permit timing can stretch that, but the bulk of the work happens fast – the waiting is mostly cure time. Call (844) 797-5026 and we’ll give you a realistic schedule for your lot.
Simple resurfacing usually doesn’t require one, but a new drive approach, a grading change, or utility work under the drive can. Because Spring Valley is unincorporated, that runs through Clark County rather than a city office. We pull what’s required and handle the inspections so it isn’t your job to sort out.
It can go over the existing drive if the base is sound and there’s room for the added thickness without throwing off drainage. Failed base means full replacement. We probe the base during the estimate to tell you which one you’re looking at, in writing.
Full replacement runs $5,000 to $14,000, and fresh paving runs $3,500 to $9,000, depending mainly on size and base condition. Call (844) 797-5026 for an exact quote – estimates are free and the price doesn’t change once work starts.
Every asphalt job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Call (844) 797-5026 to schedule your free on-site estimate.
Get a free asphalt estimate in Spring Valley
If your drive is cracked, sun-checked, or past its life, the right next step is a free on-site estimate. We measure, probe the base, and hand you a written line-item number for asphalt driveways & resurfacing in Spring Valley – no guesswork. Call (844) 797-5026; a live person answers around the clock. If your project is part of a full Driveway & Pavers in Spring Valley plan, or you’re pairing it with hardscaping, we’ll scope it together.
Written by the team at Groundwork Construction Co.












