







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBrick Paver Driveway in North Las Vegas, NV
A brick paver driveway in North Las Vegas typically costs between $12 and $22 per square foot installed, which puts a standard two-car driveway (roughly 600 square feet) at about $7,200 to $13,200. Pavers cost more than poured concrete up front, but they handle the valley’s intense sun and monsoon runoff far better, and a cracked or settled section can be lifted and reset instead of demolished. We install brick paver driveways across North Las Vegas using clay and concrete pavers set on a properly compacted base, finished with a polymeric joint sand that holds up in our dry, windy summers. If you’ve been pricing out options, give us a call at (844) 797-5026 and we’ll walk you through what a paver driveway would actually run on your property. This work is one part of the broader Driveway & Pavers services we handle.
Here’s what a lot of homeowners don’t realize until they live near one: North Las Vegas sits on soils that shift with moisture, and the same 110-degree afternoons that bake the rest of the valley cause concrete slabs to crack along the control joints. Brick pavers flex with that movement because they’re individual units laid over a flexible base. That flexibility is why we see so many original 1990s and early-2000s concrete driveways in neighborhoods like Eldorado and Rancho Del Sol starting to heave while paver driveways nearby are still sitting flat. Our technicians have up to 12 years of experience setting pavers in this climate, and every installation is covered by our 730-Day Done Right Promise: if something isn’t done right, we make it right.
We also know that “paver installer” means very different things depending on who shows up. The difference between a driveway that lasts 30 years and one that looks wavy in three comes down to base prep, edge restraint, and compaction – not the pavers themselves. We build every driveway the same way: dug to depth, base graded for drainage, compacted in lifts, set with proper restraint, and finished with joint sand. No shortcuts on the parts you can’t see once the job’s done.

Key Takeaways
- Brick paver driveway installation in North Las Vegas runs roughly $12-$22 per square foot, depending on paver type, site prep, and whether you’re replacing an existing surface.
- Pavers outperform concrete in our climate because individual units flex with soil movement instead of cracking.
- Every job is covered by the 730-Day Done Right Promise and backed by background-checked, uniformed technicians.
- We answer the phone with a live person 24/7, and estimates are free. Call (844) 797-5026.
When You Need a Brick Paver Driveway
Most North Las Vegas homeowners call us about a paver driveway for one of these reasons. See how many sound familiar.
- Your concrete driveway has cracked or heaved. After 15-20 years, the slabs in older North Las Vegas neighborhoods often develop cracks along the joints or lift at the edges where tree roots and soil movement have pushed them up. Instead of resurfacing over a failing slab, pavers give you a surface that moves with the ground.
- You want a driveway that matches your landscaping or entry. If you’ve already invested in pavers around a patio, walkway, or front entry, a brick paver driveway ties the whole exterior together. We match color and pattern so the front of the house reads as one planned design instead of a patchwork.
- You’re tired of the plain-gray look on your street. A paver driveway in a herringbone or running-bond pattern with a contrasting border instantly sets a home apart from the surrounding concrete. In newer developments off Centennial Parkway and the Aliante area, that curb appeal matters for resale.
- You have a damaged section you’d rather reset than replace. One advantage of pavers over concrete: if a section settles after a utility repair or a heavy vehicle rolled over it, we can lift the affected pavers, re-level the base, and reinstall them. No jackhammer, no new pour, no color mismatch.
- You need better drainage control. Our monsoon rains can dump an inch in an hour, and flat concrete sends all that water toward the garage. Paver driveways can be graded with a slight slope and built with permeable joints so water sheds away from the house.
- You’re replacing a gravel or dirt driveway that tracks into the house. High-desert dust is relentless, and a packed-dirt driveway in the north valley makes it worse. A paved surface cuts the dust, mud, and the constant sweeping.
If you recognize more than a couple of these, it’s worth getting an estimate. We’ll walk the property, check the current base, and tell you honestly whether your existing surface can stay under a new paver layer (it usually can’t) or needs to be removed.

Our Brick Paver Driveway Process
Every brick paver driveway we build follows the same disciplined sequence. This is what happens from the first call through the final walkthrough.
- On-site assessment and free design consult. We come out, measure the driveway, look at the base and drainage, and talk through paver style, color, and pattern. We bring samples of our Belgard and other paver lines so you’re choosing from something you can hold, not a tiny square on a web page. You’ll get a written, upfront price – the number you see is the number you pay.
- Demolition and base excavation. If there’s an existing concrete, asphalt, or gravel surface, we remove it and haul it off. Then we excavate to depth – typically around 8 to 10 inches total, accounting for base, bedding sand, and paver thickness – so the finished surface sits flush with the garage floor and street approach.
- Base compaction and grading. We lay and compact the aggregate base in lifts, checking grade so water flows away from the house toward the street or a drainage point. This is the step that separates a paver driveway that lasts from one that fails, and it’s the step we never rush.
- Edge restraint and paver setting. We install a rigid edge restraint on the sides that won’t be against the house or a wall, then set the pavers in your chosen pattern over a screeded bedding layer. Cutting around radius corners, drains, and the garage apron is done with a wet saw for clean lines.
- Polymeric joint sand and final compaction. We sweep polymeric sand into the joints, mist it to activate, and run a final plate compaction so the surface locks together. Polymeric sand resists washout and weeds – critical in our windy spring dust season.
- Walkthrough and 730-Day Done Right Promise. We walk the finished driveway with you, point out maintenance, and hand over the written promise that covers the workmanship for 730 days. If something isn’t right, we come back and make it right.
Most residential driveways are completed in a few days, weather depending. If you’re also planning fence or window work at the same time, we can scope the whole exterior as one project. Our Driveway & Pavers in North Las Vegas page covers the full menu of surfaces we install.
Paver Brands and Materials We Install
We install pavers from a curated set of trusted manufacturers, with Belgard as our primary line – proven durability in desert climates. For homes where the front entry, walkway, or porch is part of the same project, we coordinate with our door and window partners like Therma-Tru and ViewLux so the entry reads as one finished exterior. If you’ve been debating a new entry door alongside the driveway, our Windows & Doors category is worth a look. Materials come from a portfolio that includes GAF, James Hardie, and Belgard, so you’re picking quality, not just whatever’s on the shelf.
Brick Paver Driveway Pricing in North Las Vegas
Brick paver driveway pricing in North Las Vegas generally falls between $12 and $22 per square foot installed, with most two-car driveways landing between $7,200 and $13,200 total. The range is wide because a driveway built over an existing slab with poor drainage is a very different job than a fresh install on clear ground. Here’s a breakdown of what affects the number.
What drives the cost
| Cost factor | Typical range | What it means |
|---|---|---|
| Standard concrete pavers (per sq ft) | $12 – $16 | Most common choice; wide color and texture selection |
| Premium clay brick pavers (per sq ft) | $16 – $22 | Deeper color, longer lifespan, classic brick look |
| Existing surface removal (approx. 600 sq ft) | $800 – $2,000 | Concrete demolition, hauling, and disposal add labor |
| Base repair or replacement | $1,500 – $4,000 | Needed when the current base is unstable or poorly drained |
| Decorative border or pattern upgrade | $300 – $1,200 | Contrasting band, herringbone, or circle kits |
| Permeable or drainage system | $600 – $2,500 | Extra base depth, drains, or permeable joints |
These are honest ranges, not teaser numbers. We prefer to give you the whole picture up front rather than a lowball figure that grows once work starts. If your budget is tight, we can talk through options – 0% financing for 18 months and $1,000 off projects over $10,000 can make a full paver driveway workable without pinching other priorities. And every estimate is free. We’ll come out, measure, and put a written number in front of you.
Why paver driveways cost more than concrete
Poured concrete for a similar driveway can run $6 to $10 per square foot, so pavers carry a premium of roughly $4 to $12 per square foot. In return you get a surface that handles soil movement, allows section repair instead of replacement, and delivers far stronger curb appeal. Over the life of the driveway, many homeowners find they come out ahead by resetting a section rather than ripping out a cracked slab.
Budgeting and scheduling
The dry months from late fall through early spring are our busiest for paver installs because the weather is predictable and the ground is stable. If you’re working around a home sale or a landscaping project, plan on booking a couple of weeks ahead. Call us at (844) 797-5026 and we’ll give you a realistic timeline for your particular street. Our broader Driveway & Pavers pricing page has ranges for adjacent work like patios and walkways.
FAQs – Brick Paver Driveway
How much does a brick paver driveway cost in North Las Vegas?
A typical two-car brick paver driveway in North Las Vegas costs between $7,200 and $13,200, based on $12 to $22 per square foot installed. The low end reflects standard concrete pavers over a solid existing base; the high end reflects premium clay pavers, demolition of an old surface, and base repair. Call (844) 797-5026 for an exact quote – estimates are free and there are no hidden add-ons.
Do pavers hold up in North Las Vegas’s heat?
Yes – pavers are one of the best surfaces for our climate. North Las Vegas summers routinely top 110 degrees, and while concrete expands, contracts, and cracks, brick pavers flex with the ground and resist that heat cycling. Light-colored pavers stay noticeably cooler underfoot than dark concrete. We also use polymeric joint sand that resists the wind blowing it out during spring dust storms.
Can you install pavers over my existing concrete driveway?
Usually no. Laying pavers directly over a failing or uneven concrete slab traps water and inherits every crack underneath. For a driveway meant to last, we remove the old surface, rebuild the base, and install fresh. In rare cases where the slab is flat, stable, and adequately drained, we’ll discuss it – but we’d rather do the job right than save a few hundred dollars on demo. Call us and we’ll tell you honestly after a look.
How long does a brick paver driveway installation take?
Most residential driveways in North Las Vegas are completed in about three to five days, depending on square footage, site access, and whether demolition is needed. We keep you updated daily on progress and don’t leave the site a mess overnight. If weather or a supply delay pushes the timeline, we let you know before it happens, not after. Call (844) 797-5026 to schedule a free assessment and get a realistic start date.
What does paver driveway maintenance involve?
Very little compared to concrete. Sweep or blow off debris, and re-sand joints every two to three years if wind and sun have worn them down. Polymeric sand is the key – it resists washout and blocks weeds from sprouting in the seams. Avoid pressure-washing at high PSI, which can blow out joint sand. We’ll show you the simple routine at the final walkthrough.
Are your technicians background-checked?
Yes. Every technician who works on your property is background-checked and arrives in uniform. We don’t subcontract to unvetted crews or show up in an unmarked vehicle. That’s part of the standard we hold across every North Las Vegas project, and our technicians bring up to 12 years of experience to the job.
What is the 730-Day Done Right Promise?
It’s our written workmanship guarantee: if something we installed isn’t right within 730 days, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to every paver driveway we install. We hand you the promise in writing at the walkthrough so there’s no ambiguity about what’s covered. Call (844) 797-5026 if you have questions about the coverage before you commit.
If you’re ready to trade a cracked, plain slab for a driveway that handles North Las Vegas heat and monsoon rain the way it should, we’re ready to take a look. Our team answers calls with a live person 24/7 – no voicemail loops, no waiting until Monday. Call (844) 797-5026 for a free estimate and design consult, and we’ll walk you through paver options, base prep, and a written price you can count on. The number we give you is the number you pay, and every install is backed by the 730-Day Done Right Promise. From foundation to finish line, we build driveways that hold up and back them in writing.
Written by the team at Groundwork Construction Co. of North Las Vegas, serving North Las Vegas.


