







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Moapa Town, NV: What the Job Actually Costs
Cabinets & countertops in Moapa Town typically run $14,000 – $45,000 for a complete kitchen’s worth of both, with most homes landing in the $18,000 – $30,000 band. The work is plywood or particleboard boxes hung plumb and level, a stone or quartz top templated and cut to the wall, and a dry-fit that accounts for how far out of square a rural valley home usually is. Plan on two to three weeks from demo to final caulk. Call (844) 797-5026 to set up a free on-site estimate.
How the work actually sequences, day by day

People picture cabinets arriving on a truck and going straight onto the wall. That’s maybe 20% of the job. The rest is measuring, correcting, and waiting on the stone, and the waiting is the part nobody budgets for.
Days 1 – 2: template and teardown
We measure every wall, corner and ceiling line in the room and record the out-of-square dimensions, because on a 1970s farmhouse in the Muddy River valley a run that reads straight on a tape can be an inch and a half off over ten feet. Then the old boxes and top come out. You decide here: keep the existing layout or shift a run. Shifting one means electrical, and often plumbing, so this is the fork in the road.
Days 3 – 5: rough-in corrections
Outlets get re-boxed to the new cabinet heights, the dishwasher and range circuits get checked, and any soft drywall or rotted subfloor under the old cabinets gets replaced. You finalize door style, finish color and box material during this window, since lead times are real and the order has to go in.
Days 6 – 8: cabinet set and stone template
Boxes go in, shimmed and screwed to studs, uppers hung level off the highest point of the ceiling line. Only after the boxes are set and locked does the stone fabricator template. Nothing gets cut before this. It’s the single biggest cause of a top that doesn’t fit.
Days 9 – 15: fabrication, set, and finish
The slab is cut, edge-profiled and polished, then set on the cabinet run with a bead of silicone. Sink and faucet go in after. Final pass is hardware, toe kick, caulk lines and a slow close check on every door and drawer. On a ground-up custom home on acreage we’re often coordinating this against other trades, which pushes it to the long end.
Final walkthrough
We open every drawer, close every door, check the reveals are even and run water through the sink. If something’s off, it gets fixed on the spot, not scheduled for later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll be weighing
The two decisions that drive most of the price are box construction and top material. Everything else is trim.
- Box material: Plywood holds screws and survives moisture far better than particleboard. Particleboard is cheaper and fine in a dry, well-vented room; in a valley home with a swamp cooler or a spotty exhaust fan, we push plywood.
- Door style and finish: Painted MDF shaker is the budget-friendly pick and looks sharp; it chips at the corners over time. Solid wood and thermofoil sit in the middle. Full custom millwork costs more and takes longer to arrive but fits a non-standard wall without filler strips.
- Countertop grade: Laminate is the low-cost option and shows heat marks. Quartz is the middle-and-up standard, non-porous and consistent. Granite costs more and needs sealing. Butcher block suits a ranch kitchen’s look and needs oil.
- Sink and faucet: Undermount sinks require a stone top to be cut around them, while a drop-in works with laminate. Faucet brands like American Standard and Sterling cover the range from basic to solid.
- Hardware and organization: Soft-close hinges, full-extension slides, pull-outs and a lazy Susan. Cheap hardware fails first; good hinges and slides are worth the line item.
What cabinets & countertops cost in Moapa Town, NV

A cabinet install alone is $4,000 – $13,000. A countertop install alone is $2,000 – $6,500. A backsplash adds $800 – $2,500. Put them together with the rough-in corrections most rural homes need, and you’re in the $14,000 – $45,000 range.
What pushes a job toward the top of that range:
- Room size and run length: A 30-square-foot galley is a different job than a 200-square-foot kitchen with an island.
- Moving plumbing or electrical: Relocating a sink, range or dishwasher means rough-in work, permits, and inspection, which adds cost and days.
- Existing condition: Out-of-square walls, sagging floors and old wiring in an aging farm home take correction time before a single box goes up.
- Material grade: Custom millwork and a premium stone add real money but also real lead time. Mid-grade quartz and semi-custom boxes keep it in the middle.
- Distance and haul: Material comes from Las Vegas suppliers, roughly 50 miles away, and that haul is a line item, not a hidden surprise.
A written estimate from us lists each of those separately. What it won’t include unless we call it out: appliance delivery and hookup, flooring replacement under the new toe kick, and any structural change to a wall. You’ll see those as separate lines, not absorbed into a vague total.
See the difference
Before
After
Before
After
Before
AfterWhat Moapa Town homes specifically do to this job
Moapa Town sits in the Muddy River valley, about 50 miles northeast of Las Vegas, in ZIP 89025. That distance matters: cabinets and stone ship in from the valley, and a wrong measurement isn’t a same-day trip to the supplier. It’s a re-order and a week.
The bigger factor is the housing stock. A lot of the homes here are older ranch and farm structures on large rural parcels, mixed with newer custom builds on acreage. In the older homes we regularly find walls out of plumb, floors that have settled, and cabinets installed decades ago with no shims and no fasteners into studs. That’s correction work before installation, and it’s where budgets get surprised. The other local wrinkle is caliche-hard desert ground and flood-prone washes, which is a foundation and grading issue, not a cabinet one, but it’s why we check floor level before ordering.
Permitting runs through Clark County. A straight cabinet and countertop swap usually doesn’t need a permit. Moving a sink, adding a circuit, or taking out a wall does, and we pull those and get them inspected. If your project is part of a full Kitchen Remodeling in Moapa Town, the scope and permits get handled as one job under our Kitchen Remodeling service. Homeowners often pair this with a Garage Conversion ADU in Moapa Town when the conversion also needs a kitchenette, or with a New Detached ADU in Moapa Town built on the same parcel. And we cover the whole valley through our Moapa Town service area.
Serving Moapa Town, NV – Our Local Coverage Area
We serve Moapa Town and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Moapa Town

Two to three weeks from demo to final walkthrough, and the stone fabrication is the long pole. Cabinet set is only a couple of days; the wait for templating and cutting is what stretches the timeline. Call (844) 797-5026 for a schedule based on your layout.
Usually no, if you’re replacing in the same footprint with no plumbing or electrical changes. Moving a sink, adding an outlet, or opening a wall requires a Clark County permit and inspection, and we handle that. We’ll tell you upfront what your scope triggers.
Yes, and keeping the sink and range where they are is the simplest, fastest path. Same-footprint swaps skip rough-in work and the associated cost. If the layout is genuinely wrong we’ll say so, but we won’t push a move you don’t need.
Most full kitchens land between $14,000 and $45,000, with cabinets alone at $4,000 – $13,000 and countertops at $2,000 – $6,500. Material grade and any plumbing or electrical relocation are the biggest swing factors. Call (844) 797-5026 for an exact quote, estimates are free.
Every project we do is covered by the 730-Day Done Right Promise, our two-year workmanship guarantee. If something isn’t done right, we make it right. Manufacturer warranties on the cabinets and stone pass through to you alongside it.
Get a free cabinets & countertops estimate in Moapa Town
We measure the room, check the walls and floor, and hand you a written line-item estimate that separates cabinets, stone, rough-in work and permits. No vague totals. Calls are answered by a live person 24/7, and technicians arrive background-checked and in uniform. Call (844) 797-5026 to schedule your free on-site estimate in Moapa Town.
Written by the team at Groundwork Construction Co.












