







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat a Wrought Iron Fence Actually Costs in North Las Vegas, NV
Most “wrought iron” fencing installed in North Las Vegas runs $38-$90 per linear foot, which puts a typical residential job at $3,500-$9,000 once you include posts, footings, and gates. Here’s the catch nobody mentions at the sales pitch: true wrought iron hasn’t been commercially produced in the U.S. for decades. What you’re being quoted is almost certainly powder-coated tubular steel, and in our desert climate the corrosion risk at weld points is real. Call (844) 797-5026 for a free on-site estimate with the material spec itemized in writing.
Key Takeaways
- Standard 4-ft flat-top steel fence: $38-$55 per linear foot installed
- Custom 6-ft spear-top with decorative panels: $55-$90 per linear foot
- Ornamental custom-fabricated work: $80-$140 per linear foot
- Engineered post footings add $12-$18 per foot on fences over 6 feet tall
- Finish spec (primer type and coat thickness) decides whether your fence looks good at year 7 or year 15

Why “Wrought Iron” Means Something Different Than You Think
Wrought iron is a low-carbon iron with slag fibers worked into it. It bends before it breaks, it welds cleanly, and it resists rust in ways modern steel doesn’t. It’s also essentially gone from the American supply chain. Every contractor quoting “wrought iron fence” in North Las Vegas today is selling mild steel tube, usually 16- or 14-gauge, formed into pickets and rails, then powder-coated.
None of that is a scam. Tubular steel is a good product for the money. The problem is what happens at the weld joints. Powder coat is applied as a dry spray and baked on, and it thins or micro-cracks at weld points where metal geometry gets complicated. In coastal markets, humidity is the enemy. Here in North Las Vegas, it’s the sun. Summer highs routinely push above 105°F, and UV exposure breaks down paint and powder coat faster than you’d see in milder climates. Once the coating fails at a weld, bare steel meets morning condensation, and rust starts. That’s the failure mode a cheap quote won’t warn you about.
What Coat Thickness Should You Specify?
For a desert installation, quality powder coat should be at least 3-5 mils thick, applied over a zinc phosphate primer. That primer layer is the one most budget fabricators skip, and it’s the difference between a 15-year finish and a 7-year one. Ask for it in writing before you sign anything. If a contractor can’t tell you the primer type and coat thickness, they either don’t know or don’t want you to know.
Groundwork Construction Co. of North Las Vegas itemizes tube gauge, finish spec, primer type, and footing design on every fence bid. That’s how our upfront pricing works: the number you see is the number you pay, and you can see exactly what the number buys.

Wrought Iron Fence Cost in North Las Vegas
Here’s how the installed cost breaks down by style for a typical residential property in North Las Vegas. These ranges reflect the current local market including material, labor, and standard footings.
| Fence Style | Cost per Linear Foot |
|---|---|
| Standard 4-ft flat-top tubular steel | $38-$55 |
| Custom 6-ft spear-top with decorative panels | $55-$90 |
| Ornamental custom-fabricated (design-dependent) | $80-$140 |
| Engineered post footings (fences over 6 ft) | $12-$18 additional per foot |
For comparison, a Fence Installation in North Las Vegas project in vinyl typically lands in the $3,500-$9,000 range, and aluminum in the $4,000-$10,000 range. Steel sits higher once you add height and detailing, but it also carries the longest visual lifespan when it’s specified properly.
The Footing Cost Nobody Quotes Upfront
North Las Vegas sits in a high-wind and seismic zone, and the city enforces stricter wind-uplift and shear requirements than neighboring jurisdictions. That has a direct cost consequence for ornamental steel fencing. Any fence over 6 feet tall needs engineered post footings, typically 8-inch concrete piers set to 42-inch depth. That’s $12-$18 per linear foot for the footing alone, before you buy a single picket.
A lot of per-foot quotes leave that line out and then add it after you’ve signed. We itemize it. The soil here doesn’t make things easier either. The region’s expansive clay moves with moisture, which is why engineering matters on exterior structures. The 730-Day Done Right Promise covers finish integrity and post stability specifically because those are the two failure points we see most in this climate.
Common Local Scenarios We See
The split between new construction and older infill shapes most of the fence work here. In fast-growing master-planned communities like Tule Springs, Valley Vista, and Aliante, many homeowners are upgrading the builder-grade fencing on newly finished homes, and the priorities are matching community design standards and getting post depth right on recently graded lots. In the older core around Downtown and Rancho, we’re usually replacing rusted or leaning fencing on 1950s-70s ranch properties, and the challenge is often a footing that needs to be cut out and repoured rather than reused.
- New subdivision upgrade: builder-grade fence removal plus a 5-ft spear-top steel installation with matching gate hardware
- Aging ranch rehab: cut out failed footings, engineer new piers, and reset posts to current wind-load code
- Pool barrier: code-compliant height and self-closing gate hardware with spec on coat thickness for the higher UV load near water
- Corner-lot privacy: blended heights and panel patterns to satisfy sightline rules while keeping the yard screened
We work with trusted brand partners across every category, and for fence-adjacent exterior work that means materials like PGT and CGI windows and doors when a project scope expands. Nothing gets added to your estimate without your say-so.
What Separates a 15-Year Finish From a 7-Year One
Two things: the primer and the gauge. Zinc phosphate primer under a 3-5 mil powder coat holds up through UV cycles far longer than bare or thinly primed steel. Heavier-gauge tube resists the flex that opens micro-cracks in the coating at welds. Spec both, and you’re buying a fence that looks the same at year 15 as it did at year 2. Skip both, and you’re rolling the dice. Our technicians have up to 12 years of experience inspecting exactly this kind of failure, and the 730-Day Done Right Promise means if the finish fails or a post shifts, we make it right in writing.
Every fence project includes background-checked, uniformed technicians, upfront pricing with no surprises, and a free project estimate and design consult. We also offer 0% financing for 18 months and $1,000 off projects over $10,000. For the full scope of what we install, see our Fence Installation service.
FAQs
A typical residential wrought-iron-style steel fence in North Las Vegas costs $3,500-$9,000 installed, or roughly $38-$90 per linear foot depending on height, style, and how much custom fabrication is involved. Engineered post footings add $12-$18 per foot if your fence is over 6 feet. Call (844) 797-5026 for an itemized estimate with no surprises.
No. True wrought iron hasn’t been commercially produced in the U.S. for decades, and virtually every “wrought iron fence” sold in North Las Vegas today is powder-coated mild steel tube. That’s a perfectly good product, but the weld-point corrosion risk in our desert climate is real and worth understanding before you buy. Call us for a straight answer on what your quote actually includes.
Specify a zinc phosphate primer under a 3-5 mil powder coat, and check the weld points once a year for any coating failure. North Las Vegas UV exposure breaks down paint and powder coat faster than milder climates, so a thicker, properly primed coat is the single best protection. Call (844) 797-5026 to talk through finish specs before you commit.
Standard flat-top steel on existing footings often goes in on a single visit, while custom fabrication, engineered footings, and gates usually need a multi-day window. We’ll give you the real timeline in the estimate, not an optimistic one. Call (844) 797-5026 for a free estimate and a clear schedule.
Get Your Fence Priced Before You Sign
Bring your fence line, your gate count, and your questions. We’ll walk the property, spec the gauge and coat thickness, itemize the footing cost, and hand you a number that holds. Free estimate, upfront pricing, 730-Day Done Right Promise, live person answer 24/7. Call Groundwork Construction Co. of North Las Vegas at (844) 797-5026 today.
Written by the team at Groundwork Construction Co. of North Las Vegas, serving North Las Vegas, NV.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo












