







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Are Custom Windows Made? A North Las Vegas Manufacturing Walkthrough
Custom windows are made by specifying a glass package, spacer system, and gas fill to the climate zone where the unit will live, then fabricating the frame to a fraction of an inch around that spec. For North Las Vegas, that means an IECC Zone 3B package tuned for solar control, not a national-average unit ordered off a production line. Groundwork Construction Co. of North Las Vegas specs Andersen and Marvin units for this zone and stands behind both the product and the install through the 730-Day Done Right Promise. Call (844) 797-5026 for a free estimate and design consult.
North Las Vegas is one of the fastest-growing big cities in the U.S., and it shows in the windows. Drive through Aliante or Valley Vista and you’re looking at stucco-on-frame tract homes built after 1990, most with rough openings that are close to standard but rarely exact. Head south toward Downtown and Rancho and you’ll find 1950s-to-70s ranch houses where the framing has moved a quarter inch in a few directions. Add summer highs above 105°F, intense sun, and a high-wind zone, and a window that wasn’t specified for this desert will show it within a few summers.
Key Takeaways
- Custom doesn’t only mean non-standard size. It means the glass, coating, gas fill, and spacer are chosen for the climate zone.
- North Las Vegas is IECC Zone 3B, which weights solar control (low SHGC) differently than colder zones.
- Andersen and Marvin fabricate to roughly 1/8-inch tolerance, which is what lets a unit match an irregular rough opening without cutting into framing.
- Every custom IGU gets an integrity check at the factory, and we inspect it again on delivery.

Why Does Climate Zone Decide the Glass Before the Size Does?
Because the coating and gas fill determine how the window performs all summer, and the size only determines whether it fits. A custom window built for North Las Vegas starts with the energy code’s climate zone classification. The city sits in IECC Zone 3B, a hot-dry zone, and the spec priorities there look different from those in Zone 4 or 5. In a colder zone, the manufacturer leans toward keeping heat in, which raises the emphasis on U-factor. In Zone 3B, the bigger lever is keeping solar heat out without killing daylight, so architects and manufacturers target a lower Solar Heat Gain Coefficient (SHGC) and a strong low-E coating matched to that goal.
This is where the standard production line falls short. A window built to a national average can overprioritize heating performance, which is wasted in a city that sees 105°F for weeks. A unit spec’d for Zone 3B prioritizes solar control. Both are “energy-efficient” on the label; only one is built for the desert.
What Happens on the Manufacturing Floor?
The manufacturing sequence for a low-E, low-SHGC custom unit runs through several distinct steps, and each one is where a shortcut shows up later. Here’s the honest version, without getting into anything a homeowner should try to do themselves:
The glass and the coating
Glass is cut to the custom dimensions, edges finished, and, where the application calls for it, tempered. The low-E coating is applied by a sputtering process: microscopic layers of metal oxide are deposited onto the glass in a vacuum chamber. That’s what gives the glass its selective performance, blocking a large share of solar heat while letting visible light through. It’s also a factory process. Nobody is applying low-E on a job site.
The spacer bar
The two panes are separated by a spacer bar. In our climate, warm-edge spacers (usually a structural foam or hybrid design) matter. Aluminum spacers conduct heat readily, and in a place where a window cycles hot by day and cool by night, that thermal movement stresses the seal. Warm-edge spacers reduce the thermal bridge at the edge of the unit, which helps keep the seal and the factory warranty intact through many years of thermal cycling.
The gas fill
Once the unit is sealed, it’s filled with an insulating gas. Argon is the default. Krypton gets specified when the unit needs a thinner overall profile, which is relevant here: a desert-optimized unit sometimes runs a thinner cavity, and krypton carries more insulating value in less space than argon does. The choice comes down to the measured cavity and the performance target, not to a preference.

How Do You Get a Custom Window That Fits a North Las Vegas Rough Opening?
You start with a field measurement, not a tape-measure guess. Our technicians have up to 12 years of experience measuring openings in stucco-on-frame housing here, and the first thing they do is check whether the rough opening is square and whether the framing has shifted. A 1998 tract home in a master-planned subdivision often has an opening that’s slightly off from the original plans. An older ranch house in the city’s core can be off by more than that.
Those measurements feed into the manufacturer’s CAD system. Andersen and Marvin fabricate to about 1/8-inch tolerance, which is the whole point: the unit matches the opening without modifying the framing. No cutting studs, no shimming a standard window into a space that doesn’t want to accept it, no gaps to stuff with trim. If you want the full rundown on unit types and materials before you go custom, start with our Windows & Doors page.
Custom sizing is also where a split market matters. North Las Vegas runs on two tracks at once: new slab-on-grade construction up north and rehabilitation of aging homes in the core, all under the city’s own expedited permitting and inspection regime. A window order that starts with a real measurement is the difference between a clean install and a week of callbacks.
What Happens When a Custom Window Ships, and What Do We Check?
The window arrives from the factory already inspected, and then we inspect it again before it goes near a job site. This is the step homeowners usually never see.
- Factory inspection: the manufacturer checks the unit for dimensional accuracy, frame finish, and hardware function.
- IGU integrity: the insulated glass unit is tested for seal integrity. A failed seal allows moisture between the panes, which shows up as fogging. It also voids the performance spec.
- Delivery inspection: we check the frame for shipping damage, confirm the glass package matches the spec we ordered, and verify the spacer and gas fill before installation scheduling.
- Install-day fit: a final check against the measured opening before flashing and sealing.
If a unit doesn’t pass, it doesn’t go in. That’s part of why the 730-Day Done Right Promise exists: because we specified the glass package and we install the unit, we stand behind both the product performance and the installation. If either one fails within two years, we make it right. Built to last, backed in writing.
What Do Custom Windows Cost in North Las Vegas?
For planning purposes, most custom window projects in North Las Vegas land in these ranges. Impact-rated units command the higher end of the range because of the glass package and the high-wind requirements this city enforces on exterior openings. Our upfront pricing means the number you see is the number you pay.
| Project | Typical Range |
|---|---|
| Window Replacement | $4,500-$15,000 |
| Impact Window Installation | $8,000-$25,000 |
Two standing offers help with a large custom order: 0% financing for 18 months and $1,000 off projects over $10,000. Financing and promos don’t change the manufacturing spec, but they make a full custom order easier to fit into a real budget. When you’re ready to talk numbers, our team will scope the order line by line.
If you’re also tightening up the rest of the house at the same time, windows are the one exterior upgrade that pairs naturally with roofing and fence installation, both of which we handle. If you’re adding a room or an ADU and need windows specified into the plan, home additions & ADU covers that side. And for anyone comparing installers across the valley, our North Las Vegas service area page lays out how we work the city. For more on what we build overall, visit our home page.
FAQs
Yes, they perform measurably better, and the reason is the spec, not the brand. A custom unit built to IECC Zone 3B targets a lower SHGC and a warm-edge spacer tuned for thermal cycling, while a national-average stock window may be optimized for a climate that doesn’t match ours. In a city that runs above 105°F for weeks, that difference shows up in room temperature and in how long the glass unit lasts. Call (844) 797-5026 for a free estimate and we’ll walk through the exact spec for your home.
Yes, in most cases, and that’s the point of fabrication tolerance. Andersen and Marvin build to about 1/8-inch tolerance, so the measured opening can be matched without cutting into studs. Our technicians verify the opening is square before ordering, and if the framing has shifted enough that a custom unit won’t work, we tell you before you spend the money. Call (844) 797-5026 to schedule a measurement.
Lead time varies by manufacturer, glass package, and whether the unit is impact-rated, and we’ll give you a specific timeline with the order. What we don’t do is promise a date we can’t hit. Our live person, 24/7, answers your questions the whole way through, and our upfront pricing means nothing shifts once the order is placed. Call (844) 797-5026 to discuss timing for your project.
We make it right, and the 730-Day Done Right Promise is why. Because we control the specification and the installation, we’re accountable for both. If the glass unit fails or the installation is at fault within two years, we handle the fix under the promise. Call (844) 797-5026 and we’ll assess it.
Ready to Specify a Window That’s Built for This City?
If you’d rather have it looked at, Groundwork Construction Co. of North Las Vegas offers a no-pressure assessment in North Las Vegas. We’ll measure the opening, walk you through the glass package and climate spec, and give you an upfront number before anything is ordered. Call (844) 797-5026 for a free estimate and design consult.
Written by the team at Groundwork Construction Co. of North Las Vegas, serving North Las Vegas, NV.


