







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Whitney, NV: What the Job Actually Involves
New cabinets and countertops in Whitney usually run $14,000 – $45,000 for a full kitchen’s worth, and the work itself takes 2 to 4 weeks from tear-out to final caulk. Cabinets go in first, the template for the countertop is made from the installed boxes, and the stone or quartz lands about 7 to 10 days after that. Most Whitney homes we work on are original mid-century stucco-and-block builds along the Boulder Highway corridor, so we plan for uneven wall framing and slab quirks before anyone swings a hammer. Call (844) 797-5026 for a free estimate.
How the Work Moves From Tear-Out to Final Caulk

Cabinets and countertops aren’t complicated, but they’re unforgiving of bad sequencing. Get the order wrong and you’re re-templating stone or patching walls behind cabinets that are already set. Here’s the actual order we run.
Stage 1: Site measure and layout confirmation (day 1)
We measure the room, check for out-of-square walls and floor dips, and confirm the cabinet layout against your appliance choices. This is where you lock in the fridge size, range width, and whether the sink stays put. Fifteen-year-old Whitney homes often have a wall that’s out of plumb by an inch over eight feet. We shim and scribe rather than pretend it’s straight.
Stage 2: Demolition and rough-in checks (days 1 – 2)
Old cabinets come out, and this is when we find out what’s behind them. In the 1950s – 70s Whitney stock, that’s often original galvanized plumbing, knob-and-tube-era wiring that’s been patched over, or drywall with water staining from an old leak. If plumbing or electrical needs to move for the new layout, that happens now, not later. Anything requiring a permit gets pulled before this stage starts.
Stage 3: Cabinet installation (days 3 – 6)
Base cabinets set first, leveled and shimmed, then uppers hung to the scribed line. Full-overlay doors and drawers get adjusted so the reveals are even, which is the difference between a job that looks custom and one that looks like a box store. You’ll want to be reachable during this stage in case a filler panel or a microwave hood clearance needs a decision.
Stage 4: Template and countertop fabrication (days 7 – 14)
Once the boxes are set, the countertop fabricator templates the actual installed cabinets. Quartz and granite get cut off-site and typically take 7 to 10 days, which is the longest wait in the schedule. This is the window where the kitchen is unusable, so plan meals accordingly. Laminate and butcher block come back faster.
Stage 5: Countertop set, sink, and finish details (days 14 – 18)
The countertop gets set, the sink and faucet go in, and any backsplash outside this scope gets scheduled separately. We caulk, touch up, and walk the job with you. Final inspection, where one is required, happens after this stage. The whole sequence is covered by our 730-Day Done Right Promise, so if a cabinet door sags or a seam lifts in year one, we come back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions happen before day one, and they’re the ones that move the price most. Here’s the honest rundown.
- Stock vs. semi-custom cabinets. Stock boxes are cheapest and fastest but come in fixed sizes, which means filler strips and less efficient use of an odd Whitney kitchen footprint. Semi-custom (what we typically spec from KraftMaid) lets you adjust depth, height, and interior, and it’s worth the jump if your kitchen is anything but a perfect rectangle.
- Quartz vs. granite vs. laminate. Quartz is non-porous and doesn’t need sealing, which suits busy kitchens. Granite is natural and heat-tolerant but needs periodic sealing. Laminate is the budget pick and has gotten dramatically better, but it won’t survive a hot pan or a knife slip.
- Door style and finish. Painted MDF doors look clean but chip at the corners. Solid wood and plywood-box construction hold up better in dry desert air. Shaker is still the default for a reason.
- Sink and faucet configuration. Undermount sinks look better and are easier to wipe, but they add fabrication cost. A drop-in sink saves money and is fine if the countertop budget is tight.
- Hardware and lighting. Soft-close hinges and drawer slides are standard on the brands we use. Under-cabinet lighting is cheap to add during install and expensive to retrofit later.
Cambria and KraftMaid are the two brands we lean on most for this work because both hold up in the heat and both have real warranty backing.
What Cabinets & Countertops Costs in Whitney, NV

Cabinet installation in Whitney runs $4,000 – $13,000 and countertop installation runs $2,000 – $6,500, so a full kitchen’s worth of new cabinets and countertops lands at $14,000 – $45,000 depending on the variables below. Here’s what moves the number:
- Room size and cabinet count. A small galley kitchen with 18 linear feet of cabinets sits near the low end. A large kitchen with an island and 30-plus feet pushes toward the top.
- Condition behind the walls. If the plumbing and wiring are original 1950s Whitney stock, expect rough-in repairs to add cost. That’s not a surprise line item, but it’s real money.
- Relocating plumbing, electrical, or structure. Moving a sink or range to a new wall means new supply, drain, and often a permit. Keeping the sink in place saves thousands.
- Material grade. Stock cabinets and laminate countertops versus semi-custom and quartz is a $10,000-plus swing on a mid-size kitchen.
- Permit scope. Cabinet replacement alone typically doesn’t need a permit in unincorporated Clark County. Moving plumbing or electrical usually does, and that adds inspection cycles to the schedule.
Every written estimate itemizes cabinets, countertops, labor, disposal, and any permit fees separately. The number you see is the number you pay. What’s typically not included: appliance purchases, backsplash tile, and any flooring repair uncovered during demo.
See the difference
Before
After
Before
After
Before
AfterWhat Whitney Homes Specifically Do to This Job
Whitney is unincorporated Clark County, wedged between Las Vegas and Henderson along Boulder Highway. That matters more than it sounds, because permits, inspections, and code enforcement here run through Clark County rather than a city building department. If your cabinets and countertops job involves moving a sink, adding a circuit, or touching structure, plan for the county review timeline rather than a same-week city turnaround. The Boulder Highway corridor also has redevelopment-area rules that occasionally affect what’s allowed near the frontage, so it’s worth knowing where your lot sits before we finalize a layout.
The housing stock drives most of the surprises. Whitney is a mix of 1950s – 70s single-story stucco-and-block homes, mobile home parks, and small commercial strips, with newer infill near Sam Boyd Stadium and the 89122 east side. In the older homes we regularly find out-of-square walls, slab dips at the kitchen, and original galvanized lines that need replacing once the cabinets come out. We check the sink and dishwasher connections before demo so the surprise shows up on the estimate, not on day three. Pair the kitchen work with something bigger and it’s often part of a full Kitchen Remodeling in Whitney, or homeowners sometimes fold it into a Garage Conversion ADU in Whitney when a second kitchen is in play. Our kitchen remodeling service covers the wider scope, and we handle Whitney end to end.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Whitney

Most cabinets and countertops jobs in Whitney take 2 to 4 weeks from tear-out to final walkthrough. The longest wait is the 7 to 10 days for quartz or granite to be fabricated after templating. A smaller job with laminate countertops can wrap in 10 to 14 days. Call (844) 797-5026 for a schedule specific to your kitchen.
Cabinet and countertop replacement alone typically doesn’t require a permit through Clark County. You do need one if the job moves plumbing, adds or relocates electrical circuits, or changes structure. We pull whatever permits the scope requires and pass inspection before we call the job done. Call (844) 797-5026 and we’ll tell you upfront whether your layout triggers one.
Yes, and most Whitney jobs we do keep the sink where it is. Keeping the sink means no new supply, drain, or permit, which saves thousands and shortens the schedule. If you want the sink under a window or moved to a different wall, that’s doable but expect rough-in work and a longer timeline.
A full kitchen’s worth of new cabinets and countertops in Whitney runs $14,000 – $45,000. Cabinet installation alone is $4,000 – $13,000 and countertop installation is $2,000 – $6,500. The variables that push it up are room size, material grade, and whether rough-in work is needed. Call (844) 797-5026 for an itemized written estimate, free of charge.
Every cabinets and countertops job we complete in Whitney is covered by our 730-Day Done Right Promise. If a door sags, a seam lifts, or the installation doesn’t hold, we come back and make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Call (844) 797-5026 to get started.
Get a Free Cabinets & Countertops Estimate in Whitney
We’ll come out, measure your Whitney kitchen, and hand you an itemized written estimate covering cabinets, countertops, labor, disposal, and any permit fees, with no change orders later. A live person answers the phone around the clock, so you’re never stuck in voicemail. Call (844) 797-5026 to schedule your free on-site estimate.
Written by the team at Groundwork Construction Co.












