







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Sunrise Manor, NV: What It Takes and What It Costs
Door installation in Sunrise Manor typically runs $650 to $3,200 per door installed, and most single-door jobs are finished in one day. Entry and patio door swaps that stay in the existing rough opening move fastest. Jobs that widen a wall, add a sidelight, or replace a 1970s hollow-core with a solid slab in an out-of-square opening take two to three days. Call (844) 797-5026 for a free on-site estimate before you commit to anything.
How We Handle Door Installation Here, Stage by Stage

Doors are unforgiving. A quarter inch off at the jamb and you’ll feel it every time you close it. Here’s the actual sequence we work through on a Sunrise Manor door install.
Stage 1: Measure and confirm the opening (45 minutes, day of estimate)
We pull true measurements of the rough opening, check the wall for plumb and the slab for level, and confirm what’s behind the drywall – framing depth, any electrical running near the strike side, stucco thickness on exterior walls. You decide at this stage whether you’re keeping the door in the same opening or enlarging it. That decision drives everything downstream, including whether a permit enters the picture.
Stage 2: Order and verify (1 to 3 weeks, mostly waiting)
Stock sizes in Therma-Tru and similar lines turn around in about a week. Custom widths, odd heights, or a specific glass pattern push it to three. When the door lands, we verify it against the opening measurements before we touch the wall. Catching a factory error here saves a week of backtracking.
Stage 3: Demo and prep (2 to 4 hours)
Old door and frame come out. We inspect the framing for rot, check the sill pan on exterior doors, and address any water damage before the new unit goes in. In Sunrise Manor’s older stucco homes, this is where we sometimes find soft framing at the threshold – better to fix it now than hang a new door over a compromised wall.
Stage 4: Set, shim, seal (3 to 5 hours)
The new door goes in, gets shimmed plumb and square, and is anchored per manufacturer spec. Exterior doors get flashing tape at the head and a proper sill seal. We check the reveal gaps all the way around – consistent gaps mean the door will swing true for years. Insulation and sealant finish the exterior envelope.
Stage 5: Hardware, trim, and final swing test (2 to 3 hours)
Hinges, lockset, deadbolt, and any closer or sweep go on. Interior and exterior trim gets installed and caulked. Then we open and close the door a dozen times, check the latch engagement, and confirm the weatherstripping seals without dragging. You walk it with us before we pack up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions happen before we order. These are the ones that matter most.
- Steel vs. fiberglass vs. wood exterior doors. Steel runs lowest on cost and holds paint well, but dents and can rust at the bottom edge where desert irrigation splashes. Fiberglass (Therma-Tru’s line is a common pick) resists heat, won’t dent, and mimics wood grain convincingly – it’s the sweet spot for Sunrise Manor’s sun exposure. Wood looks best and costs the most, and it needs refinishing every few years in this climate.
- Solid core vs. hollow core interior doors. Hollow-core is lighter and cheaper; it also transmits sound and feels flimsy. Solid-core costs more per door but closes with weight and dampens noise between rooms. In a 1960s ranch with thin walls, solid-core makes a noticeable difference.
- Prehung vs. slab replacement. Prehung units include the frame and install faster when the existing jamb is compromised. Slab-only swaps reuse the frame and cost less, but only work if the existing frame is square and sound.
- Glass and finish choices. Decorative glass, sidelights, and transoms add light and curb appeal – and cost. Low-E glass matters here; the afternoon sun through a west-facing door is brutal from May through September.
- Hardware finish and function. Entry sets, keyed vs. smart locks, and finishes that hold up to sun. Cheap finishes pit within two summers in this heat.
What Door Installation Costs in Sunrise Manor, NV

Door installation in Sunrise Manor runs $650 to $3,200 per door, depending on the door and the opening. That’s the honest range – here’s what moves you toward the top or bottom of it.
| Scope | Typical range |
|---|---|
| Interior door, same opening, stock size | $650 – $1,100 |
| Exterior entry door, prehung, stock size | $1,200 – $2,400 |
| Exterior door with sidelight or custom glass | $2,000 – $3,200 |
| Enlarging or reframing an opening | +$400 – $1,200 |
Four things push the number. First, door material and grade – a steel slab and a fiberglass entry system with decorative glass aren’t the same job. Second, the opening’s condition: out-of-square framing, rot at the threshold, or a wall that needs reframing adds labor. Third, size and configuration – standard 32- or 36-inch widths cost less than custom. Fourth, permit scope: a straight swap usually doesn’t need one, but widening an opening in a load-bearing wall does.
A written estimate from us lists the door, the labor, the trim, the hardware, and any framing or repair work as separate lines. It doesn’t include painting or staining, or repairs discovered after demo reveals hidden damage – we flag those before proceeding, not after. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Sunrise Manor Homes Specifically Do to This Job
Sunrise Manor is an unincorporated Clark County township, not a city, so door work here runs on Clark County Building Department permits and inspection schedules. That matters because a straight door swap in the 89110 ZIP rarely triggers a permit, but enlarging an opening or altering a load-bearing wall does – and the inspection timeline is the county’s, not ours to shortcut.
The housing stock is the other factor. Most of these homes went up in the 1960s through the 1980s as single-story stucco-on-frame tract houses on slab foundations. Original doors from that era – hollow-core interiors, thin steel entries – are at the end of their service life. We regularly find entry door framing that’s gone soft at the bottom from decades of irrigation splash and monsoon rain pushing against stucco that’s lost its seal.
The extreme heat and intense sun age exterior finishes fast, so fiberglass and properly sealed steel hold up better here than wood. And because parcel-level jurisdiction can shift between county islands sharing the same mailing address, we confirm the permit path before ordering anything. If the door is part of a larger envelope upgrade, our Windows & Doors in Sunrise Manor page covers the wider scope.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Sunrise Manor

A single interior door takes about half a day; an exterior entry door takes most of a day. Multiple doors scheduled together usually finish in one to two days, and jobs requiring reframing stretch to two to three. Call (844) 797-5026 for a timeline specific to your home.
A straight swap in the existing opening typically doesn’t require a permit; enlarging an opening or altering a load-bearing wall does. Because Sunrise Manor is unincorporated Clark County, we confirm the permit path through the county building department before work starts. Call (844) 797-5026 and we’ll tell you exactly what your door needs.
Yes. Most door installations stay entirely within the existing rough opening – no plumbing, no structural change. Only when you’re widening a wall or relocating a door entirely does framing or structure enter the picture, and we’ll flag that at the estimate. Call (844) 797-5026 to walk through your layout.
Expect $650 to $3,200 per door, with interior doors at the low end and exterior entry doors with glass or sidelights at the top. Call (844) 797-5026 for an exact quote – estimates are free.
Every installation is backed by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That covers the workmanship on top of the manufacturer’s warranty on the door itself. Call (844) 797-5026 to schedule your free estimate.
Homeowners often pair a door install with Cabinets & Countertops in Sunrise Manor during a bigger interior refresh, or with a Garage Conversion ADU in Sunrise Manor when the old garage door is coming out anyway. You can see the full range of what we do across Sunrise Manor through our service-area page, and browse our Windows & Doors service for the wider envelope work.
Schedule Your Free Door Installation Estimate
A free on-site estimate for door installation in Sunrise Manor starts with a call to (844) 797-5026. We measure the opening, talk through your options, and hand you a written line-item quote – no pressure, no vague ranges. Calls are answered by a live person around the clock. Background-checked, uniformed technicians handle the work, and the 730-Day Done Right Promise backs every install in writing.
Written by the team at Groundwork Construction Co..












