







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Paradise, NV: What the Job Actually Involves
Cabinets & countertops in Paradise, NV typically run $14,000 – $45,000 for a full tear-out and replacement, with cabinet installation alone at $4,000 – $13,000 and countertops at $2,000 – $6,500. Most jobs take three to five working days on site, plus two to four weeks of lead time for cabinets and fabricated stone. Call (844) 797-5026 to schedule a free estimate and we’ll put a written, line-item number in front of you.
How We Run a Cabinet and Countertop Job, Start to Finish

This isn’t a five-minute overview. It’s the actual sequence, so you know what day one looks like and when you have to make a decision.
Stage 1: Site measurement and layout confirmation (day 0, about two hours)
We measure every wall, check for out-of-square corners and floor level, and confirm the appliance openings. This is where you decide the layout: same footprint or a change. Anything that moves a sink, a range, or a dishwasher means plumbing and electrical work, so we flag it now rather than mid-job.
Stage 2: Demo and prep (day 1, one to two days)
Old cabinets and countertops come out, along with the backsplash if it’s being replaced. We check the wall behind for water damage, secure the substrate, and repair drywall where the old uppers left holes. If we’re relocating a supply line or an outlet, that happens here and gets inspected before anything goes back on the wall.
Stage 3: Cabinet install (days 2 – 3)
Bases go in first, leveled and shimmed, then uppers, then filler and trim. Doors and drawers get adjusted on site so they close flush. You’ll confirm hardware placement before we drill. This is the stage where a cheap install shows: uneven reveals and doors that rub are almost always a leveling problem, not a cabinet problem.
Stage 4: Template and countertop fabrication (days 3 to 10)
For stone, we template the installed cabinets, then the slab is cut and polished at the fabricator. That gap is the longest stretch of the job and the one most schedules get wrong. Laminate and butcher block can be cut and fit the same week. The sink cutout and faucet holes are set at template, so finalize the sink model before this step.
Stage 5: Countertop set, backsplash, and final walkthrough (days 10 – 14)
Countertops get set and sealed, the sink and faucet go in, and the backsplash goes up if it’s part of the scope. We run water, check for leaks, and walk the job with you. Anything on the punch list gets handled before we call it done.
If the cabinets are part of a bigger tear-out, this usually folds into a Kitchen Remodeling in Paradise schedule and the sequencing shifts to match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Be Choosing Between
Most of the money and most of the regret live in these four decisions. Here’s the honest trade-off on each.
- Cabinet boxes and doors: Stock cabinets are the fastest and cheapest, but they come in fixed sizes, so you fill gaps with filler strips. Semi-custom is the sweet spot for most Paradise homes and lets you hit the ceiling line cleanly. Full custom costs the most and takes the longest. Door material matters too: painted MDF looks sharp but chips at the corners, while a wood or thermofoil door holds up better in a hot, dry house.
- Countertop surface: Quartz is the default for good reason. It’s non-porous, doesn’t need sealing, and handles desert-dry air without cracking. Granite is durable and one of a kind, but it needs resealing. Laminate is the budget play and has genuinely improved, though seams and heat are still its weak points. Butcher block warms a room up but wants oiling.
- Sink and faucet: An undermount sink paired with a solid-surface top is cleaner to wipe and easier to keep sealed than a drop-in. A single-basin sink fits a sheet pan; a double basin suits two people working at once. Faucet finish is a style call, but valve quality is not. A name like American Standard or Toto in the fixture spec buys you parts availability years down the road.
- Hardware and edge profile: Pulls and knobs are cheap to change and easy to get wrong at scale. Pick them before install so the drill spacing is right. The countertop edge profile is a smaller decision than people think, but a thicker built-up edge adds visual weight at a real cost.
What Cabinets & Countertops Costs in Paradise, NV

Expect $14,000 – $45,000 for a full cabinet and countertop replacement in Paradise, and $9,000 – $20,000 on a smaller kitchen where the footprint stays put. Here’s the line-item breakdown we work from:
| Item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Five things push a job toward the high end. Kitchen size and cabinet count come first. Second is existing condition: water damage behind a sink or a floor that’s out of level adds prep. Third is whether you move plumbing, gas, or electrical, which brings in a permit and a trade. Fourth is material grade, since a full-custom door and a thick quartz slab sit at the top of the scale while laminate and stock boxes sit at the bottom. Fifth is whether you’re adding an island, which means new circuits and often a floor repair.
Every estimate we write is line-item, so you see the cabinet cost, the countertop cost, and the labor separately. Upfront pricing, no surprises: the number you see is the number you pay. We also take $1,000 off projects over $10,000 and offer 0% financing for 18 months. Call (844) 797-5026 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWhat Paradise Homes Specifically Do to This Job
Paradise is one of the few unincorporated urban communities in the country, which means a contractor can’t just pull a City of Las Vegas permit. Every cabinet and countertop job that touches plumbing, gas, or electrical here goes through Clark County’s building department, the same single counter that handles the whole Las Vegas Valley. That creates review timelines and inspection quirks that contractors working strictly inside city limits never deal with, and it’s a constant source of confusion for out-of-town builders who assume a city permit is enough. We schedule inspections through the county’s system and build that wait into the job calendar.
The housing stock matters just as much. Paradise’s residential blocks are dominated by mid-century tract homes from the 1950s through the 1970s, often with the original cabinet boxes and a galley layout built around a smaller refrigerator than anything sold today. We see the same three failures: particleboard boxes swollen from a slow sink leak, laminate tops delaminating at the seam, and uppers hung on drywall with no blocking behind them. A cabinet job in a 1962 tract house frequently turns into a wall repair, and we quote that possibility upfront instead of surprising you later.
The Mojave heat plays a quieter role. Adhesive and sealant want cooler temperatures, so summer installs get scheduled early in the day. We cover Paradise from ZIP 89105, and the same crew that handles a kitchen here also runs a Garage Conversion ADU in Paradise when a homeowner wants the old garage turned into a rental before the kitchen gets touched. Others pair the cabinet work with a New Detached ADU in Paradise for a family member, and the two schedules get coordinated. All of it is our Kitchen Remodeling work, and you can see the full range of what we cover across Paradise.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Paradise

Three to five working days on site, plus two to four weeks of lead time for cabinets and fabricated stone. The template-to-install gap on quartz or granite is the longest stretch, so plan for the kitchen to be usable but not finished for about two weeks. Call (844) 797-5026 and we’ll give you a date range against your actual cabinet choice.
Only if the job moves plumbing, gas, or electrical, or changes the layout or structure. A straight swap of same-size cabinets and a new top over the existing footprint generally doesn’t need one. Anything that relocates a sink, adds an island outlet, or removes a wall does, and that permit comes from Clark County. We pull it and schedule the inspection, and we tell you which side of that line your job falls on before you sign.
Yes, and it’s the most common way we do it. Keeping the sink and range in place saves the permit, the trade work, and several days. The catch is that stock cabinet sizes rarely land exactly on the old plumbing centers, so we use a sink base sized to the existing rough-in or shift the cabinet run a few inches. We measure the rough-in on the first visit so this is settled before you order.
The full range runs $14,000 – $45,000, with cabinets at $4,000 – $13,000 and countertops at $2,000 – $6,500 on their own. A smaller kitchen that keeps its footprint lands closer to $9,000 – $20,000. Material grade and layout changes move the number most. Call (844) 797-5026 for a free estimate with the line items broken out.
Every cabinet and countertop job is covered by our 730-Day Done Right Promise. If something isn’t done right, we make it right, and that’s in writing, not a verbal handshake. Cabinet and countertop manufacturers carry their own product warranties on top of ours. Our technicians have up to 12 years of experience and are background-checked and uniformed on every visit.
Get a Free Cabinet and Countertop Estimate in Paradise
Call (844) 797-5026 and a live person answers, day or night. We’ll set a time to walk your kitchen, measure the walls, check the plumbing rough-in, and talk through cabinet and countertop options at your budget. You leave with a written, line-item estimate and a realistic schedule. Free design consult, $1,000 off projects over $10,000, and 0% financing for 18 months are all on the table. Estimates are free and there’s no pressure to sign on the spot.
Written by the team at Groundwork Construction Co..












