







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Paradise, NV: What It Costs and How Long It Takes
A Chain Link Fence in Paradise, NV typically runs $3,500 – $9,000, and most residential yards are finished in one to three days once we have the survey and any county approval in hand. You’re getting galvanized steel fabric stretched over posts set in concrete, with options for height, gauge, coating and gates. The number that matters is the written line-item quote, and we put it in front of you before a single post is set. Call (844) 797-5026 to set up a free on-site estimate.
How a Chain Link Job Actually Runs, Start to Finish

Most fence contractors wave at the yard and text you a number. A chain link job that holds up for decades is built in stages, and you should know what each one looks like so you can tell the difference.
Stage 1: The walk and the layout (day of estimate, 30 – 45 minutes)
We walk the property line with you, confirm where the fence goes, and mark corners. This is where you decide height (4, 5 or 6 feet), gate placement, and whether you want the fence to follow the lot line exactly or pull in a foot to simplify the run. On Paradise lots, the property line question is usually the rub, because a lot of the mid-century tract homes here were platted tight and a survey may show a foot of encroachment nobody knew about. We flag that now, not after the concrete sets.
Stage 2: Utility locate and permit packet (2 – 10 business days)
Before any digging, the 811 locate has to clear, and on anything above a certain height or along a property line, Clark County wants a permit packet. Because Paradise is unincorporated, that packet goes to the county, not a city counter, and review timing depends on their queue. We handle the submittal and the inspection scheduling so you’re not chasing it. If your lot has an old septic line or irrigation run in the fence path, this is when we find it.
Stage 3: Demo and prep (a few hours to a full day)
Old fence comes out, posts get pulled, and we clear the line. If there’s a rock wall footing or old concrete piers in the way, that’s a breaker-and-haul day. Post holes get dug to depth with the right spacing, typically 8 to 10 feet on center for a residential run, and deeper on gate posts so they don’t sag under their own weight.
Stage 4: Setting posts and stretching fabric (1 – 2 days)
Posts go in concrete and cure. Then top rail, tension bands, and the fabric gets stretched with a come-along and tied off. Gates get hung and adjusted so they swing clean. This is the stage where corners are either done right or you’ll be re-tensioning them in three years. We don’t leave a job with a gate that drags.
Stage 5: Inspection and final walk (same day as completion, plus the county slot)
We walk it with you, check gate swing, tension, post plumb, and confirm the inspection deadline with the county. Anything that isn’t right gets fixed before we call it done. And because it’s covered by our 730-Day Done Right Promise, if something shifts or sags inside that window, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Fabric gauge. 11.5 gauge is the residential standard and the right call for most yards. 9 gauge is heavier and worth it if you’ve got dogs leaning on the fence or a corner that catches monsoon wind. The cost difference is real but not dramatic.
- Coating. Bare galvanized is the cheapest and holds up fine in dry heat. Vinyl-coated (usually black or green) runs more but looks better against landscaping and resists the sun-baked chalky look galvanized gets after a decade in the Mojave.
- Height. 4-foot rails are common for a simple boundary. 5 and 6 foot is standard for containment and privacy screening. Anything taller starts pulling the permit conversation harder.
- Post and rail weight. Heavier wall thickness on posts and top rail is what keeps a long run from sagging. On runs over 100 feet, this is money well spent.
- Gates. Walk gates, drive gates, or a double swing gate for RV access. Gate hardware quality varies a lot, and a cheap hinge is the first thing to fail.
- Top rail vs. tension wire. Top rail gives a cleaner line and better structure. Tension wire is cheaper and fine on short runs but looks looser.
If you’re weighing a coated chain link against something with more visual privacy, the wider project usually lands on a Fence Installation in Paradise plan where we look at the whole perimeter, not just one side.
What a Chain Link Fence Costs in Paradise, NV

Plan on $3,500 – $9,000 for a residential chain link fence in Paradise. That range covers the bulk of what we quote.
What pushes a job toward the low end: a short run under 100 feet, flat ground, no demo, standard 11.5 gauge galvanized, one walk gate, no permit complications. What pushes it toward the high end:
- Linear footage. The single biggest driver. A 200-foot perimeter costs roughly double a 100-foot one once you account for posts, concrete and labor.
- Access and terrain. A corner lot with a rock wall, or a run that has to be hand-dug because equipment can’t get back there, adds labor hours.
- Demo and haul-away. Pulling an old fence and disposing of it is a line item, not a favor.
- Material grade. 9 gauge, vinyl coating and heavier rails all move the number up.
- Permit and inspection scope. Anything requiring county review adds time and a fee.
A written estimate from us is line-itemed: footage, gauge, coating, gates, demo, permit handling, and any footing work. What’s typically not included: survey costs if the property line is in dispute, and landscape repair after we finish. We tell you that up front.
See the difference
Before
After
Before
After
Before
AfterWhat Paradise Homes Do to This Job
Paradise is unincorporated, which means every fence permit goes through Clark County rather than a city building department. The same county counter serves the whole Las Vegas Valley, and that creates review queues and inspection scheduling quirks that contractors used to working strictly inside Las Vegas city limits don’t run into. It’s the single most common source of confusion on fence jobs here, and it’s why we schedule the county inspection slot the week the permit clears, not after we finish digging.
The housing stock matters too. A lot of Paradise is 1950s – 70s tract homes and dense apartment and condo complexes, and older lots often have undocumented irrigation, old footings and property lines that don’t match the plat. On top of that, Mojave sun bakes galvanized steel and monsoon gusts test every post you set. We set gate posts deeper here for that reason. You’ll find the same conditions across Paradise and the surrounding neighborhoods we cover.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Paradise

Most residential jobs are built in one to three days of on-site work, but add two to ten business days on the front end for the county permit and utility locate. Call (844) 797-5026 and we’ll give you a realistic date range, not a guess.
Yes, in most cases, because Paradise is unincorporated and Clark County handles the permit review instead of a city office. We handle the submittal and inspection scheduling for you. Call (844) 797-5026 to talk through your specific lot.
Usually, yes. We set posts with a targeted auger and keep the footprint tight, so the impact is limited to the post line. If a utility or irrigation line sits in the path, we find that during the locate and route around it. Call (844) 797-5026 to schedule a walk-through.
Expect $3,500 – $9,000 for a typical residential job, with footage, gauge, coating, gates and demo driving where you land in that range. Call (844) 797-5026 for an exact line-item quote, free of charge.
Every chain link fence we install is covered by our 730-Day Done Right Promise, which means if a post sags or a gate drags inside that window, we make it right. Call (844) 797-5026 to ask about the details.
Get a Free Chain Link Fence Estimate in Paradise
Call (844) 797-5026 and a live person answers, any hour, any day. We’ll set a time to walk your property, mark the line, talk through gauge and gate options, and hand you a written line-item estimate with no surprises. Upfront pricing, county permit handling, and the 730-Day Done Right Promise behind it. If the fence is part of a bigger plan, homeowners often pair it with ADU Site Prep & Utilities in Paradise or a new gate program through our Fence Installation service.
Written by the team at Groundwork Construction Co.












