







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Enterprise, NV: What the Job Actually Involves
Cabinets & countertops in Enterprise, NV typically run $4,000 – $13,000 for cabinet installation and $2,000 – $6,500 for countertops, with most full kitchen cabinet-and-top projects landing between $14,000 and $45,000 when layout changes, an island, and a backsplash are folded in. The work itself takes two to four weeks from demo to final caulk, and the countertop template can’t happen until the cabinets are set and level. Call (844) 797-5026 and we’ll walk your project on site, free.
How we run a cabinet and countertop job, start to finish

Every phase has a decision attached to it, and the sooner you make it, the shorter the schedule. Here’s the real sequence.
1. Measure, layout, and cabinet order (days 1 – 3, then a 3 – 6 week lead time)
We measure the room, check the walls for plumb and the floor for level, and confirm whether the existing boxes stay or go. You pick the door style, finish, and box construction at this stage, and we place the order. This is the longest wait in the whole job, so it sets the calendar for everything after.
2. Demo and prep (1 – 2 days)
Old cabinets and tops come out, and we open the walls where plumbing or electrical needs to move. Any drywall repair or framing gets done now, before a single box gets hung. If you’re relocating a sink or adding a dedicated circuit for a range, that rough-in happens here.
3. Cabinet set and level (2 – 4 days)
Base and wall cabinets go in, shimmed and screwed into studs, then leveled as one plane. This is where a cheap install falls apart later: doors that rub and tops that rock usually trace back to a rushed set day. We don’t template a counter until the boxes are dead level.
4. Countertop template and install (template day 1, install 7 – 14 days later)
A fabricator templates the exact cabinet footprint, then cuts and installs the slab or engineered top. You’ll pick the edge profile and the sink cutout before template day, because changes after that mean a new piece. Sink and faucet go in at install.
5. Backsplash, punch, and walkthrough (2 – 4 days)
The backsplash goes up after the counter is set so the tile dies cleanly into the top. Then hardware, caulk, a final clean, and a walkthrough where we point out anything we’re correcting before you do.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Most of the budget swings live in these four decisions. Here’s the honest trade-off on each.
- Cabinet boxes: stock vs. semi-custom vs. full custom. Stock sizes are the cheapest and fastest but leave filler strips at the walls. Semi-custom lets you adjust widths and heights for a real fit. Full custom costs the most and buys you exact dimensions and unusual finishes.
- Door material: thermofoil, painted MDF, or solid wood. Thermofoil is budget-friendly and holds up fine in dry desert air, but it can peel at edges over time. Painted MDF looks crisp and is repaintable. Solid wood handles refinishing best and costs the most.
- Countertop surface: laminate, quartz, or granite. Laminate is the value pick and fine for rentals or a quick flip. Quartz is the current default for a reason: non-porous, low maintenance, consistent color. Granite gives you a unique slab and takes heat well but needs sealing.
- Island and layout. A peninsula is cheaper because it reuses existing plumbing runs; a true island usually means moving a drain and adding an outlet, which pushes the number up.
What Cabinets & Countertops costs in Enterprise, NV

The lead range for this job in Enterprise is $14,000 – $45,000. That’s a wide spread, and it’s wide for a reason. Here are the line items and the variables that move them.
| Line item | Range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash installation | $800 – $2,500 |
What pushes a job to the top of the range: a larger footprint with more linear feet of cabinets, relocating the sink or range (plumbing and electrical), a structural change like removing a wall for an island, premium door styles or full-slab stone, and permitting when the scope touches structure or utilities. What keeps it at the low end: keeping the layout, reusing the plumbing locations, stock or semi-custom boxes, and a quartz or laminate top in a standard depth.
Your written estimate itemizes cabinets, tops, labor, demo, and any permit fees, and that number is the number you pay. No change orders sneaking in mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise homes specifically do to this job
Enterprise is one of the fastest-built-out corners of the Las Vegas Valley, and that shapes this work in ways you won’t see in older parts of the valley. Almost everything we touch in the 89139 corridor south of the 215 is 1990s-to-2020s tract and master-planned construction: wood-frame, stucco-clad homes on post-tensioned slab-on-grade foundations. There’s essentially no historic stock here, so the job is rarely a gut renovation of a legacy kitchen. More often it’s a builder-grade upgrade or a warranty-era correction.
Two things trip up crews who don’t work this corridor. First, post-tension slabs: any later trade that needs to anchor into or cut the slab has to know where the tensioned cables run, and we plan island electrical and any floor penetrations around that. Second, caliche. On 89139 lots, crews routinely hit cemented desert hardpan just below grade, which can stall a plumbing trench if the site wasn’t pre-ripped. And in a master-planned subdivision, the HOA usually has a say on exterior venting and any structural change, so we check the CC&Rs before demo. If your project grows into a full Kitchen Remodeling in Enterprise scope, that review happens up front.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Enterprise

Plan on two to four weeks of on-site work, plus a three-to-six week cabinet lead time before we start. Countertop fabrication adds one to two weeks between template and install.
Straight swap-outs usually don’t require a permit; relocating plumbing, electrical, or structure does. We pull the permit and schedule the inspection when the scope calls for it, and we tell you which side of that line your job falls on before we quote.
Yes, and it’s the most common way we work. Keeping the sink, range, and walls where they are drops the job toward the low end of the range and shortens the schedule. A layout change is a separate decision you can make later.
Most full projects run $14,000 – $45,000. Call (844) 797-5026 for an exact quote on your kitchen; the estimate is free.
Every project is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Our technicians have up to 12 years of experience, and the guarantee is in writing.
Get a free cabinets and countertops estimate in Enterprise
We’ll walk your kitchen, measure the footprint, and hand you a written itemized quote with real numbers, not a range you can’t budget against. Calls are answered by a live person 24/7 at (844) 797-5026. We cover all of Enterprise, including the 89139 corridor, and homeowners often pair cabinets with a Garage Conversion ADU in Enterprise or a New Detached ADU in Enterprise when they’re adding living space at the same time. Learn more about our Kitchen Remodeling service, or just call and we’ll start with the kitchen.
Written by the team at Groundwork Construction Co.












