







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Door Installation in Enterprise, NV Actually Involves
Door installation in Enterprise, NV runs $650 to $3,400 per door depending on whether it’s an interior slab swap or a full exterior entry retrofit with framing work. A standard interior door takes 2 to 4 hours; an exterior entry replacement takes most of a day and may pull a permit. For a firm number on your specific door, call (844) 797-5026 and we’ll walk the opening with you.
Most of the work we do in Enterprise isn’t repair. It’s replacement: doors that came with the subdivision and are now binding, warped, or whistling in the wind off the desert.
How We Install a Door, Start to Finish

Door installation at Groundwork follows five stages. Each one has a decision point, and we don’t move to the next stage until you’ve signed off on the one before.
Stage 1: Measure and survey (30 – 60 minutes)
We measure the rough opening at three points, check for out-of-plumb framing, and photograph the existing threshold and header. This is where we find out whether the old frame is coming out or getting a new door set inside it. You decide on material, swing direction, and whether the hardware is staying. On a 1990s or 2000s Enterprise tract home, out-of-square openings are common and get noted here, not discovered mid-install.
Stage 2: Permit check (same day, usually)
Exterior door replacements that alter the rough opening typically need a permit through Clark County; a like-for-like interior door usually does not. We tell you which category your job falls into on the estimate, before work starts, so there’s no surprise inspection bill at the end.
Stage 3: Demo and prep (2 – 4 hours)
The old door and trim come out, we inspect the framing and sill for water damage or termite activity, and we shim and square the opening. On exterior doors we also check the flashing detail at the threshold. That’s the number one place desert heat and monsoon rain find a way in, and it’s where we spend the most prep time.
Stage 4: Set, shim, and seal (3 – 5 hours)
The new door gets set, shimmed at the hinge side, and checked for square and swing. We insulate the gap, seal the exterior with a proper flashing and caulk system, and install hardware. You confirm alignment before we move on.
Stage 5: Finish, trim, and walkthrough (1 – 2 hours)
Trim gets installed, the door gets weatherstripped, and we test the swing, latch, and weather seal. You get a walkthrough, a written punch list if anything’s outstanding, and the 730-Day Done Right Promise in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Door selection comes down to material, core construction, and how much of the opening you’re actually changing. Here’s what matters in Enterprise specifically.
- Fiberglass entry doors: The most common choice for exterior doors here. They don’t rot, they hold up to triple-digit summers without warping, and they take paint or stain well. $1,200 – $2,800 installed. Best fit for a home you’re staying in long-term.
- Steel entry doors: Stronger, cheaper ($900 – $2,200), and fine for a lot of situations. The trade-off is sun exposure; steel in direct desert sun can get hot enough to be uncomfortable to touch, and finish failure is real if it isn’t maintained.
- Wood entry doors: Beautiful, traditional, and the most demanding. $2,400 – $3,400 installed for a quality solid wood unit, and it needs refinishing every few years in this climate. Worth it if you’re after a specific look and you’ll keep up with it.
- Solid-core interior doors: $350 – $750 each installed. Quieter, more substantial, better for bedrooms and offices.
- Hollow-core interior doors: $200 – $450 each installed. Lighter and cheaper. Fine for closets and secondary rooms; they dent more easily and don’t deaden sound.
- Pre-hung vs. slab: Pre-hung units (door plus frame) run 20 – 30% more but save labor and give better results when the existing frame is out of square. Slab doors reuse the existing frame and cost less but demand a perfect opening.
For exterior doors we work with brands like PGT for impact-rated units, which is the sensible call on any door facing the afternoon sun on the west side of a 89139 home. We’ll walk through the specific options for your opening at the estimate. If the door is part of a full Windows & Doors in Enterprise project, we sequence the trades so you’re not living around two crews at once.
What Door Installation Costs in Enterprise, NV

Door installation runs $200 to $3,400 in Enterprise, depending on door type, whether the frame is being replaced, and whether the project needs a permit. Here’s how the numbers stack up.
| Door Type | Installed Range | Typical Timeline |
|---|---|---|
| Interior door, hollow-core | $200 – $450 | 2 – 3 hours |
| Interior door, solid-core | $350 – $750 | 3 – 4 hours |
| Exterior entry, steel | $900 – $2,200 | 1 day |
| Exterior entry, fiberglass | $1,200 – $2,800 | 1 day |
| Exterior entry, solid wood | $2,400 – $3,400 | 1 – 2 days |
| Impact-rated exterior door | $1,800 – $3,200 | 1 day |
The variables that push a job toward the high end: frame replacement (adds $300 – $800 because framing gets exposed and sometimes needs repair), rough opening changes (framing work, drywall patching, and a permit if it’s an exterior wall), material grade, and hardware. A basic knob and deadbolt is cheap; a smart lock retrofit or custom hardware can add several hundred dollars on its own.
Your written estimate spells out door material, labor, hardware, disposal of the old unit, and any permit fee. What it won’t cover until we’ve opened the wall: framing repair, water damage behind a threshold, or a rough opening that needs to be resized. Those get quoted in writing before we proceed, never bundled into a surprise invoice. Upfront pricing means the number you see is the number you pay, and our 0% financing for 18 months is available on larger door-and-window projects.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise Homes Do to This Job
Enterprise isn’t old housing stock; almost all of it went up between the 1990s and the 2020s as tract and master-planned subdivision construction. Stucco-clad, wood-frame, tile-roof homes on post-tensioned slab-on-grade foundations. That shapes door work here in a specific way: we’re not fighting hundred-year-old framing, we’re often replacing original builder-grade doors that were undersized for their openings and have been binding or leaking since year five.
Exterior door framing on a 89139 tract home can hide tensioned post-tension cables in the slab if the opening happens to run near a cable run. We check before we drill anything near a threshold. And because there’s no basement and no crawl space, the threshold detail on an exterior door is the only barrier between a desert monsoon and your floor – it gets our full attention.
Permits for exterior door replacements are handled through the county, and we pull them before work starts. Weather-wise, we schedule exterior installs around the summer heat; a door set in 110-degree afternoon sun is miserable to install and curing sealant behaves badly above about 100. Spring and fall are the busy season for this work. We cover all of Enterprise and the surrounding area. Homeowners often pair a door replacement with Cabinets & Countertops in Enterprise if they’re already updating the entry area, and occasionally with a Garage Conversion ADU in Enterprise where a new exterior door is part of the conversion scope. When it’s part of a wider project, our Windows & Doors team handles the coordination so it’s one crew, one schedule.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Door Installation in Enterprise

A standard interior door takes 2 to 4 hours; an exterior entry replacement takes a full day, sometimes two if framing or flashing needs repair. We schedule around your calendar and confirm the timeline on the written estimate. Call (844) 797-5026 for a firm answer on your specific door.
Exterior door replacements that change the rough opening size typically require a Clark County permit; a like-for-like interior door usually does not. We tell you which applies before work begins and handle the permit if one is needed. That’s part of the estimate.
Interior doors run $200 to $750 installed; exterior entry doors run $900 to $3,400. The biggest price variable is whether the frame gets replaced, which adds $300 to $800. Call (844) 797-5026 for an exact quote; estimates are free.
No, not for the scope on your written estimate. Framing damage or an oversized/undersized rough opening discovered after demo can add cost, but we quote that in writing before proceeding. Upfront pricing, no surprise invoices.
Every door we install is covered by the 730-Day Done Right Promise. If it’s not right, we make it right, for two years from completion. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing.
Get a Free Door Installation Estimate in Enterprise
Call (844) 797-5026 to schedule a free on-site estimate for door installation in Enterprise. We’ll measure the opening, check the framing and threshold, quote the door and labor in writing, and tell you whether a permit applies. No pressure, no vague pricing, and a live person answers the phone whenever you call. If you’re pairing doors with a larger remodel, ask about the $1,000 off projects over $10,000 promotion.
Written by the team at Groundwork Construction Co.












