







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Enterprise, NV: What They Cost and How Long They Take
Paver driveways in Enterprise, NV typically run $7,000 – $18,000 for a standard two-car driveway with base prep, and most installs take 3 – 5 working days from demo to final compaction. On 89139 lots south of the 215, the big variables are caliche excavation and how much of the old surface has to come out first. Call (844) 797-5026 for a free on-site estimate with a written, line-item number.
How a Paver Driveway Goes In, Stage by Stage

Paver work is mostly preparation. The pavers themselves are a fast, satisfying day. The week before that day decides whether your driveway still looks flat in five years. Here’s the real sequence we run.
Day 1: layout and demolition. We walk the driveway with you and mark the final edges, slope direction, and any transition to the garage apron. Then the old surface comes out, whether that’s cracked concrete, worn asphalt, or bare desert hardpan. On 89139 lots, this is where we find out how much caliche is under you. Cemented hardpan that has to be broken out with a breaker rather than scooped can add a half day or a full day. You decide the driveway’s footprint and whether it widens to reach a side gate or a third parking space.
Day 2: excavation and grading. We cut to depth (typically 8 – 10 inches for a residential driveway carrying cars and the occasional delivery truck) and grade away from the garage so water leaves the slab instead of sitting against it. This is the stage where most driveway failures are actually born, and it’s invisible once the pavers go down.
Day 3: base and compaction. Class II aggregate base goes in lifts and gets compacted between each one, then checked for grade. This is also the day we confirm where any irrigation, low-voltage lighting, or conduit needs to run, because once the base is locked in, trenching it back open is expensive.
Day 4: bedding sand and pavers. A screeded sand layer, then the pavers laid to your chosen pattern. Edge restraints get set and pinned. You’ll want to have your paver color and pattern locked in well before this morning; changing your mind mid-lay means a partial restart.
Day 5: compaction, sand, and cleanup. Plate compaction to seat the pavers into the bedding, polymeric or regular joint sand swept in, and a final wash-down. We walk the finished driveway with you before we pull off site. Most jobs wrap in 3 – 5 days; a larger driveway or heavy caliche pushes toward the long end.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Pavers and Specs You’ll Be Choosing Between
Most of the decisions here are made at the estimate, not on the job site. These are the real forks in the road.
- Concrete pavers vs. clay brick: Interlocking concrete pavers are the workhorse for a driveway that sees daily vehicle traffic, and they cost less. Clay brick pavers wear beautifully and hold color in intense sun, but they cost more and aren’t right for every driveway load. Concrete pavers suit most Enterprise homes.
- Thickness and rating: For a driveway, you want pavers rated for vehicular load, not the thinner units sold for patios and walkways. Skipping this step is the most common shortcut we see on cheap bids.
- Color and finish: Standard colors run the gamut from desert tan to charcoal. Premium finishes and blended color runs add cost. Ask how each color handles years of Mojave sun before you fall for a sample.
- Pattern: Herringbone and running bond are the two most common. Herringbone locks together better under a turning tire; running bond is a cleaner, more modern line. The pattern doesn’t change material cost much but does change labor.
- Edge restraint and joint sand: A concealed concrete or paver edge restraint is what keeps the field from spreading. Polymeric joint sand holds up better against wind and washout than plain sand. Neither is optional for a driveway.
- Drainage: A slight cross-slope or a channel drain at the garage approach. Enterprise gets very little rain, but when it does come, you want it moving away from the slab, not pooling.
See the difference
Before
After
Before
After
Before
AfterWhat Paver Driveways Cost in Enterprise, NV

Plan on $7,000 – $18,000 for a paver driveway in Enterprise, with most two-car driveways landing in the $9,000 – $14,000 band. Here’s what moves a job to the low or high end of that.
- Square footage: The single biggest driver. A short single-car pad sits near the bottom; a long two-car driveway with a turnaround sits near the top.
- Existing surface and demolition: Tearing out poured concrete or thick asphalt costs more than grading bare ground. Full tear-out plus haul-away adds to the number.
- Caliche: This is the local wildcard. If crews hit a thick cemented hardpan layer just below grade, excavation and grading take longer, and that labor shows up on the estimate.
- Paver grade and pattern: Standard concrete pavers in a running bond sit at the low end. Premium finishes, clay brick, or a labor-heavy pattern like herringbone push toward the top.
- Drainage and extras: A channel drain, a widened apron, or a border course add line items. Each is small on its own; together they add up.
Every written estimate breaks out base prep, excavation, pavers, edge restraint, joint sand, and haul-away as separate lines. What typically isn’t included until you ask: drainage corrections, moving irrigation, and any grading work beyond the driveway footprint. Upfront pricing, no surprises, and no change orders after the number is signed. The $1,000 off projects over $10,000 and 0% financing for 18 months both apply if you’re ready to move.
What Enterprise Homes Specifically Do to Paver Driveways
Enterprise is one of the fastest-built-out corners of the Las Vegas Valley, and that shapes this job in ways a driveway in an older part of the valley wouldn’t see. Housing here is overwhelmingly recent, mostly 1990s-to-2020s tract and master-planned subdivisions: wood-frame, stucco-clad, tile-roof homes on post-tensioned slab-on-grade foundations, all of it built out along the 89139 corridor south of the 215 beltway. There’s almost no legacy housing stock, so paver driveways here are usually going in front of homes that still have the original builder-grade concrete.
The caliche is the local headache. On 89139 lots, crews routinely hit cemented desert hardpan just below grade, and a crew that hasn’t priced for it will slow down or come back with a surprise change order. Post-tension slabs are the second thing. On homes with tensioned cables hidden in the slab, any later trade has to avoid cutting into them. If a driveway project needs an adjustment near the garage apron, we look before we cut, not after. Enterprise summers also mean paving labor gets scheduled around triple-digit heat, because working a plate compactor all afternoon on 110-degree asphalt or concrete is how crews get hurt and how joints get rushed. And if you live in a subdivision with HOA design rules, check any color, pattern, or width requirements before you order pavers – we can work with your HOA’s approved palettes, but a mid-job color change is a problem you don’t want.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Enterprise

A typical paver driveway in Enterprise takes 3 to 5 working days from demo to final compaction. Singles sit near 3; doubles with a turnaround, or jobs that chew into caliche, land at the top. Call (844) 797-5026 to get a timeline pinned to your lot.
Replacing a driveway surface in place usually doesn’t require a permit, but anything that changes the footprint, slope, drainage, or access near a sidewalk may. We pull and handle permits when the project scope calls for it, and pass inspections before we close out. Ask when we’re on site; we’ll tell you exactly what your job needs.
No, not for a driveway we’d stand behind. Pavers need a compacted aggregate base, and laying them over old concrete skips the base that carries the load. Tear-out and proper base prep are what make a paver driveway last, and that’s the number we quote.
Most paver driveways in Enterprise cost $7,000 – $18,000, with a standard two-car driveway typically in the $9,000 – $14,000 range. Caliche excavation, tear-out, and paver grade move the number most. Call (844) 797-5026 for a free written estimate – it’s line-itemed, not a lump sum.
Yes. Every paver driveway we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (844) 797-5026 and we’ll walk you through exactly what’s covered before you sign anything.
Homeowners often pair a new driveway with a full front-of-house refresh, so if a new Door Installation in Enterprise or updated Cabinets & Countertops in Enterprise is on the list, we can scope all of it under one plan. A paver driveway is often part of a larger Driveway & Pavers in Enterprise project, and our broader Driveway & Pavers service covers the rest if you want to compare options. We cover all of Enterprise and the surrounding valley.
Ready for a real number on paver driveways in Enterprise? Call (844) 797-5026 for a free on-site estimate. We’ll walk your driveway, check the base and grading conditions, talk through paver options and color, and leave you with a written, line-itemed estimate you can compare against anyone else’s. Live person on the line around the clock.
Written by the team at Groundwork Construction Co.












